Little help needed/ my bullpup build

[bonnox]

Just a quick question, I know most of the 22xx parts are interchangeable, but is the 2260 trigger unit compatable with the 2250 main tube ? Am trying to make a bullpup version and need a 'grip less' trigger unit,
Cheers
Tony

[bgmcgee]

It should work.

[twhooper]

will work on 2250 tube.  Would like to see pictures of the bullpup when finished.  Never been happy enough with the way mine looked to post pictures. 

[bonnox]

Early days yet, I have the stock sketched out on a piece of pine plank at the moment going to try a rough model on cheap wood before I start cutting up something expensive, I just need to get the trigger and linkage sorted again I have it roughly sketched but nothing made, can't start yet till I get my pieces made, I'm currently having a hw77 barrel tuned down to fit my steel breech to give it a chunkier look, with a 1/2" unf thread for a decent muzzle brake, once I got all the pieces together I'll get it put together

[bgmcgee]

Should be a cool build.

[Monkeydad1969]

Really looking forward to the progress of this build.

Joe

[bonnox]

So here is my first update of my bullpup design, I have the new barrel back and have it fitted, got the basic design sketched and cut out, I have the trigger and bits fitted just need to figure the technical bits out then I'll make a start on the stock properly here is some picks:
1: basic sketch of what I want to do.  http://i1317.photobucket.com/albums/t640/bonnox/f16f11bed0afcaf96fe1a4bdaed2d765_zps85407800.jpg
2: the new barrel fitted, it's a cut down weirauch 77 barrel with half inch unf thread for a moderator
http://i1317.photobucket.com/albums/t640/bonnox/b68a5a128df5dd2843a1dd9069c1c38a_zps6e389592.jpg
3: trigger and springs etc.

couple of points, yes I know they are screws they are there so I can adjust move etc to figure the bits out, and yes that is a key it's just something I had lying around to again figure out if it will work I will be swapping it out eventually, now I just need to get something to connect the trigger to the 'key' so it will be a direct pull and another spring to return the key to off, if you get my meaning,
And yes I know it's only pine that cos iv never made a stock before and pine is cheap, once iv got it figured out and working then I'll make a proper one in decent hardwood, comments welcome

[bonnox]

Trigger linkage designed and working really well 'fired' every time I pulled it, just need a return spring somewhere to put the sear trigger back to neutral although it seems to work with out it, going to start work on the stock tomorrow now

[ped]

i'm messing with a bullpup as well(when i have time) i've cut a pistol grip down to the bare bones for mine i'll post a pic when i get chance
ped

[ped]

pics of where i'm at with mine
ped

[bonnox]

Here's a picture of the rough working trigger linkage from trigger to sear
http://i1317.photobucket.com/albums/t640/bonnox/2aaa805168049abccfac17624dd9f316_zps03d01f70.jpg
Still working nicely, stock starting tomorrow :-)