• Welcome to Crosman Air Pistol Owners Forum.

PSI generated by a 1377?

Started by Poorman Plinker, August 18, 2015, 04:47:23 PM

0 Members and 1 Guest are viewing this topic.

Poorman Plinker

OK it is easy to find the psi of co2 at 75 degrees... it is 905. Can anyone help me out with the psi generated at 10 pumps with a standard 1377? And/or even modified ones? I would like to do more barrel testing with air and would like to approximate the pump gun performance without using the pump gun LOL . 8)
The above information is written for entertainment purposes only; it applies only to the arms, equipment  and conditions under which the author's conclusions were drawn and should never be used as a substitute for professional assistance. The author assume no liability for damages (actual, incidental or consequential) resulting from use of the information or for the correctness of the information contained herein. The information is most likely not applicable to your situation and it cannot be generalized to any other equipment or conditions. Use of the information is at the users risk.


K.O.

1322XLT(2100/13XX hybyid)750 fps @ 16 pumps w/CPHP 14.3g

MK1322(2240/13XX/MK177 hybrid) 805 fps at @ 22 pumps w/14.3g CPHP

about 5 more 13xxs
Two Daisy 953(# 31x Jan. 1985) & (Sept 2004)
2100b (with old style piston)
.25 Mrod (50fpe tune)
.177 BSA Buccaneer (on the way)

Poorman Plinker

Thank you gentlemen... those are 3 very good links. 8)
The above information is written for entertainment purposes only; it applies only to the arms, equipment  and conditions under which the author's conclusions were drawn and should never be used as a substitute for professional assistance. The author assume no liability for damages (actual, incidental or consequential) resulting from use of the information or for the correctness of the information contained herein. The information is most likely not applicable to your situation and it cannot be generalized to any other equipment or conditions. Use of the information is at the users risk.