Carbon Fiber shroud for a BNM breech

[Ken]

 Was wondering where to get a carbon fiber shroud that would fit the BNM breech. Thanks in advance for your help.

                                                                              Ken

                                                                                 

[quickster47 †]

Was wondering where to get a carbon fiber shroud that would fit the BNM breech. Thanks in advance for your help.

                                                                              Ken

I'm pretty sure BNM makes a shroud just not sure it's carbon fiber.

Carl

[7624452]

I'm pretty sure BNM makes a shroud just not sure it's carbon fiber.

Carl

BNM shrouds are aluminum.

[ped]

I get it of e bay 25mm od 23mm id is the size I use
http://www.ebay.co.uk/itm/1x-3k-Rolled-Carbon-Fibre-Tube-25mm-x-23mm-x-1000mm-CF25-26-75-Free-P-P-/351715294930?hash=item51e3dd7ed2:g:qGkAAOSwNSxUyyZZ

[totem]

Following Ped's recommendation I bought this carbon tube:  http://www.ebay.com/itm/141952022353?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT.  It is 25mm OD and 23mm ID and it fits the BNM breech like a glove. I verified the BNM baffles and barrel ring fit (or you can make your own).  You can get 4 baffles and a barrel ring from BNM Custom for $12.  The carbon tube is a very sharp looking matte textured finish and is very light. Cost about $35 shipped from China. 

The aluminum BNM shroud has a permanently mounted end cap.  If you use the carbon tube you will have to invent your own end cap.

Many thanks to Ped for the tip.

I've been trying to find something off the shelf I can use as an end cap (e.g. pvc fitting) but no luck so far.  Might have to ask my friend with access to a machine shop to turn down a piece of plastic rod stock to fit.  Ped, how did you make the end cap for your carbon tube?

[BillK]

totem, thanks for "finishing" the question/post with an answer.  I'm sure you helped or will help someone else.