Does anyone have a O-ring Size list for Crosman Bolts?

[arkmaker †]

Looking for a size and material chart for .177, .22 and on up Crosman bolts. Anybody have the info?


Will be my friend forever


Thanks,
Rich

[ped]

I tend to wing it with probe seals as leades and probes do vary from gun to gun
for .22 I first try a bs 006 nb70 which I find works on 90% of probes I try a slightly harder 90 grade if it's still sloppy or try a metric 3mmx2mm
for .177 either a bs003 or a metric 3mmx1mm

[BillK]

http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,1288.0.html

I have a couple of bolts with the 90 Duro  orings on and they stick in the breech after leaving them closed for a day.  Doesn't seem to hurt anything.  Just a pain when you load the first pellet.

[beejwest]

Rich,

.177
003 Buna-N O-Ring
70A Durometer, Black
1/16" ID, 3/16" OD, 1/16" Width
CS 0.060" (1.52mm)
ID 0.056" (1.42mm)

.22
005 Buna-N O-ring
70A Durometer, Black
3/32" ID, 7/32" OD, 1/16" width
CS  0.070" (1.78mm)
ID 0.101" (2.57mm)


I found 100 per pack on Amazon for about $4 each IIRC

[arkmaker †]

Thanks Guys 
Thats what I was looking for.