• Welcome to Crosman Air Pistol Owners Forum.

Hill Mk3 or Mk4 PCP pump

Started by d_ray50, October 05, 2017, 04:21:56 AM

0 Members and 1 Guest are viewing this topic.

d_ray50

Both of these pumps have a desiccant canister filter on them for moisture removal and to filter the air. Does 100% of the air that goes into the pump and ultimately into the gun go through that filter ? I assume it does but i want to be 100% sure.

rws_53

Quote from: d_ray50 on October 05, 2017, 04:21:56 AM
Both of these pumps have a desiccant canister filter on them for moisture removal and to filter the air. Does 100% of the air that goes into the pump and ultimately into the gun go through that filter ? I assume it does but i want to be 100% sure.

I would also assume 100% of the air for the Hill passes through the desiccant canister/air filter....I've got a MK3 and see no other place for air to enter the pump.

I'm following your nitrogen tank/Hill pump idea on GTA.  Got me to thinking of something similar...nitrogen tank/ Yong Heng compressor.  If it works out for you with the Hill pump I'll give my idea a try.