2250 based custom shop carbine questions

[packrat]

Odd that you say you find  the length-of-pull as long---it's only like 14" isn't it? I'm a small frame guy and even I felt that the LOP was short.....anyhow...enjoy it   the 2250B is my favorite of all the 22xx series   BTW..the 5" TKO will quieten it down to "pffft" !! Congratulations on your new toy!!!




edited to correct spelling

[bradyman1]

I didn't measure the length of pull but I have read that the LOP is around 16". The LOP seems to be a bit longer than my Crosman Titan. I'll measure it when I get a chance.

[bdb12586]

Gender:
Posts: 251



Re: 2250 based custom shop carbine questionsÃ,« Reply #19 on: March 21, 2011, 08:25:19 AM Ã,» QuoteModify

--------------------------------------------------------------------------------
the length of pull is 15.75" which is about 2.25" longer than most rifles

[packrat]

Thanks for the info...never get too old to learn 

[bradyman1]

I measured my 2400KT at 16" from the seat of the trigger to the indentation in the stock where your shoulder sets.

Here is a pic.