finally the new exotic wood from the candy shop is here....

[NorthStaR]

Do you mean a foregrip like on a 2250b?

[Serpents Den]

I would assume that as much too....as you can use John's foregrips on the 2240's as well.......

and thx again John, looking forward to those new abian wood grips for my 2240KT.... 


more and more eye candy ordered and psyched to have it all assembled and here's more pics taken for the group to see, my macassar ebony camo grips and foregrip on the 1377    pics taken with my Motorola Droid Bionic...

[Nightshade]

OH MY!!  I will have to get a clean drool towel out after looking at all this fine wood!! 

[Serpents Den]

hehe....wait until i have the rest of the bling and an 18" barrel I'm waiting on to be added to that 1377, let alone what i have ordered for the 2240KT w/ 14" barrel besides those abian wood grips....even more brass, for both guns, curtesy of Crosshairs and Mr007, Art's Shack and M Chavka in the yellow forum....(now to order a brass barrel band needed for the KT as well...thats not including power valve/piston upgrades for both and a left side cocking breech or 2 with long ext. or flowthru bolts...) 

[dpricenator]

Do you mean a foregrip like on a 2250b?

I'm an idiot.  I missed a couple pages of this thread, and now I see the pictures of his 2240 stuff.  I guess Foregrop is the term, and yes there is one made for the 2240,  I like em....

[hellgrips98]

thanks guys been busy trying to cope up with orders... thanks for posting your builds

[adnikauto]

@hellgrips98

Hope you are still making grips...
I would like to order in very "reddish" cherry blossom high gloss whole set for my custom 2300.

Design like picture below...


My custom 2300...



Should I send you gun or just money for set of grips...

Regards
adnikauto

[breakfastchef]

Seems he stopped making grips a few years ago. Too bad as we need more grip makers.

@hellgrips98

Hope you are still making grips...
I would like to order in very "reddish" cherry blossom high gloss whole set for my custom 2300.

[Tater]

Seems he stopped making grips a few years ago. Too bad as we need more grip makers.

Wow, that's a shame. I've never seen this thread as it was made before I joined. That guy did gorgeous work. Wish he still made them.

[adnikauto]

Seems he stopped making grips a few years ago. Too bad as we need more grip makers.

Oh... shxxxt...! Any ideas who and where is making them???
Tried here but no response... http://www.woodensail.com/
Just found .... http://hellgrips98.webs.com/contact.htm... please email us @ jlenon1217@yahoo.com.ph didn't try it yet...

[breakfastchef]

Oh... shxxxt...! Any ideas who and where is making them???
Tried here but no response... http://www.woodensail.com/
Just found .... http://hellgrips98.webs.com/contact.htm... please email us @ jlenon1217@yahoo.com.ph didn't try it yet...

I can only think of two current sources for grips.


A fellow on the Green Classifieds, Tom West, has been offering grip sets for several months - http://www.network54.com/Forum/278474/. Not my style, but you may like them.


A guy who goes by the name Vernon over on the American Airgun Classifieds is offering soem very nice grips each week - http://www.airguns.net/classifieds/classifieds.php. I do not know if Vernon is also making pump arms.


Steve Corcoran used to make superb target-style grips for the 13xx pistols. He has reduced his work load but may make a set upon request, but they will not be cheap! http://www.woodsandwateroutdoors.com/index.htm'


If all else fails, you could contact Laurent at http://www.edgrips.com/. He makes a nice set of walnut grips and pump arm. Shipping from France takes less than two weeks.

[KevinP]

I can only think of two current sources for grips.


A fellow on the Green Classifieds, Tom West, has been offering grip sets for several months - http://www.network54.com/Forum/278474/. Not my style, but you may like them.


A guy who goes by the name Vernon over on the American Airgun Classifieds is offering soem very nice grips each week - http://www.airguns.net/classifieds/classifieds.php. I do not know if Vernon is also making pump arms.


Steve Corcoran used to make superb target-style grips for the 13xx pistols. He has reduced his work load but may make a set upon request, but they will not be cheap! http://www.woodsandwateroutdoors.com/index.htm'


If all else fails, you could contact Laurent at http://www.edgrips.com/. He makes a nice set of walnut grips and pump arm. Shipping from France takes less than two weeks.

and you have archer and our own davio .... 

[adnikauto]

Thank you guys, thank you very much- especially for breakfastchef I send a few emails and hope some good will come out of it!
Meantime have a great weekend for all of you!

Regards
adnikauto 

[targettgii]

I just bought a set of grips from vernon I will post pics as soon as I get them.

[crossliner]

This Canadian guy Mr. Joe Hickey is a fine craftsman..He quoted me this piece of furniture and it's only $160..He is yet to resume making them again though..