New to the 1701P Scene

[DRAGON64]

Something like this one but not quite so exotic but at least gives the general idea.

Carl

Looks good...so when are you going to put the TALL riser on shorty? 

[laptopdragon]

wow...am i ever impressed..
free floating barrel ?

i started with something i needed for a hobby, to keep my mind and body busy on the low cost, and found myself needing a 2nd job for a wish list...


actually, im quite content reading about your guys new stuffs for a while, i want to master the 1377 for a year first, then i will expand to something like the 1701, or marauder, or ?   (ok, i may need a rifle soon for the target shoots)...

[quickster47 †]

Yes the barrel on the 1701P floats but you could also do that to your 13XX or 22XX guns by adding two additional set screws to the long steel breech.  Presuming you have replaced the plastic breech with a long steel breech.  See the picture I attached below.  It takes a half hour to do the drilling and tapping of the holes, plus two additional set screws and then you can do away with the barrel band and have a free floating barrel.

Also, usually the after market breechs will have at least two set screws and some three, I think.

Carl

[quickster47 †]

Okay dragon master, this is my first cut at a new 1701P stand.  If you want it, it's yours for $12 plus shipping.

Let me know.

As you can see it sets up enough that it should accommodate any set of grips.

Carl

[quickster47 †]

And two more of the stand by itself.  The gun just slips into the wood.  The front of the air tube sliding into the hole in the wood and supported by the rear stanchion.

Carl

[quickster47 †]

Forgot to mention that it comes apart and is held together with three screws.

Carl

[DRAGON64]

Looks good to me, how would you like to settle up?  I can paypal plus 3%, just let meknow what you need for shipping... My pistol arrived, so I have been playing 

[quickster47 †]

Give me a zip code and I can figure shipping.

Carl

PayPal will be good.