2300t and carbine stock

[mcc1961]

Can you get a carbine stock to fit a 2300T?

[JEBert]

You Betcha!  The 2300 series has the same grip frames as the 24XX and 13XX.  The green one matches the 2289 green forearm.
The Crosman part numbers are:
Shoulder stock - Green       1389-022
Shoulder stock - Black         1399a001
Forearm assembly - Green   1389-010
1399 forearm - Black           106-39
The black forearm seems to be unavailable as of late.  I have a green one that I painted black with Rust-Oleum Truck Bed Coating and you can't really tell it from the black one.
I know that the 2300 needs no forearm but I included the info here in case anyone reading this needs it.
The length of pull on these stocks is long (16") but I cut one down and I like it.  You can see where I took two inches out of this one just ahead of the butt.  The thickness didn't match up well enough to suit me and I tried sanding it to match.  The differences in thickness looked better then than the sanding marks look now.  With two inches cut out of it, the length of pull is now 13.5" in the middle of the butt.
In this pic the tube stock adapter is still on the gun
Cheers,
Jerry

[mcc1961]

Is the one they sell at PA the same and who is cheaper?

[JEBert]

I haven't seen the one at PA but I imagine it is the same stock.  Crosman will have the lowest price and $4 shipping.  Call their customer support number, ask to place an order, and give them the part number(s).  1-800-724-7486
Just thought I would add that these pics are of a 1377 but the same stocks will fit your 2300.  If you want a different look, you can get an adapter from Charlie Mellon, add a paintball shoulder stock, and voila'!  The adapters need to be made to match which gun you want to put them on because the 1377 and 22XX series of guns have a different tube diameter.  Just tell Charlie what gun you are ordering it for.
Cheers,
Jerry

[JEBert]

I just put the Crosman shoulder stock on my 2300KT w/ 10.1" barrel.  Here is what it looks like.
I bought my black one in April for $10.80 + $4 shipping.
Crosman's price for the green one in July was $12.29 + $4 shipping.
Cheers,
Jerry

[quickster47 †]

Can you get a carbine stock to fit a 2300T?

I have one to sell that is 99% new.  $16 plus shipping to your place of residence.  If you find one cheaper, buy it.

Carl

[T191032]

I just put the Crosman shoulder stock on my 2300KT w/ 10.1" barrel.  Here is what it looks like.
I bought my black one in April for $10.80 + $4 shipping.
Crosman's price for the green one in July was $12.29 + $4 shipping.
Cheers,
Jerry

I like how that sight combination looks.

[JEBert]

I like how that sight combination looks.

Thanks, I have the iron sights on it in case the battery on the red dot goes out or if the red dot otherwise gives me problems.  It hasn't but I haven't gone out plinking with it either, I've only shot targets at 5 & 10 meters with it.  The red dot may, at some time, not be the best option and having the rear adjustable notch and front pin combination available might keep me shooting.  Mostly in case the battery goes when I don't have a spare handy.  I guess I'm a belt & suspenders kind of guy.
That BSA-RD30 seems too low for a taco hold.  However, last week I figured out that although I can see my fingers, they show up less than half-way from the bottom edge of the viewable area to the middle where I have the red dot when using a taco hold and it works just fine.  I like it.
I haven't shot it with the shoulder stock on it, I just stuck it on there to show mcc1961 what his might look like if he got one.
Cheers,
Jerry

[mcc1961]

I got my carbine stock today and tried to get my BSA Edge 2-7x28 scope to work with it but the eye relief was way too long and i could not get a good sight picture.So i put a 3-9 x40 rifle scope on it ,but it is dead on accurate this way.

[quickster47 †]

Now that is looking mighty fine.  And it is oh so true that you need a scope with longer eye relief when convert the pistol to a carbine.  Did you make that RVA (Rear Velocity Adjuster) or did someone else make it?  Looks good. 

Carl

[mcc1961]

I got it from Cothrans.