Target ready 1377

[RC1947]

Got the parts I needed and have begun the fun of shooting this pistol.  My 8 yr old grandson loves shooting it too. RC

[quickster47 †]

Your shooting looks great.  Grab a target or two from our monthly competitions and have at it and join in our fun.

Carl

[Crosshairs]

Nice job that Red dot sure looks nice on your gun.Good luck with it. 
                                                   Mike

[Smaug]

Long steel breech. I've got a rifle scope on mine though, which I think I'm going to replace with a 2x20 BSA pistol scope.

I've got a BSA red dot that is very similar to your Tasco, but the bases are for wider grooves, and it won't fit on my 1377. Also, I remember the red dot being a big large for really precision work...

I think I'm going to hook it up with a good pivot pin and a flat top piston and valve, and see if I can't get a bit more power out of a given number of pumps.

Why don't you enter in the monthly target shooting competition in the sub-forum below? It's a good time, and there's a good range of skill levels there.

[RC1947]

Long steel breech. I've got a rifle scope on mine though, which I think I'm going to replace with a 2x20 BSA pistol scope.

I've got a BSA red dot that is very similar to your Tasco, but the bases are for wider grooves, and it won't fit on my 1377. Also, I remember the red dot being a big large for really precision work...

I think I'm going to hook it up with a good pivot pin and a flat top piston and valve, and see if I can't get a bit more power out of a given number of pumps.

Why don't you enter in the monthly target shooting competition in the sub-forum below? It's a good time, and there's a good range of skill levels there.

For $10 from PA you can get a 3/8 to 5/8" Weaver adapter - I use one on my 2240.  My printer doesn't work, but if I knew which target of the many listed I need, I'd go to the library with a stack of paper.  RC

[Smaug]

For $10 from PA you can get a 3/8 to 5/8" Weaver adapter - I use one on my 2240.  My printer doesn't work, but if I knew which target of the many listed I need, I'd go to the library with a stack of paper.  RC

There's one target for each competition, linked in the top post of the thread where you post the targets. The rest of them are shots of our results.

So three each month. There's a bench rest target, with 12 tiny targets, one shot each; a 10m offhand target, with one big target, and a 5m offhand target with 6 sub-targets.

If you need help, maybe someone is local to you. Where are you located?

Also, what's wrong with your printer? Sometimes, the ink cartridges clog up on you and just need to be put through a cleaning cycle, or, worst case, be replaced.

[arkmaker †]

A little trick...........Print once, make copies of each (Kinko's, Staple's, Office Depot or should I dare say work for free). The only one that changes is the Special Alternating target. The rest stay the same. 25 of each gives you a years worth with plenty of practice targets... just something I try to do.

I'm better at giving advise than following it as I ran out of copies and used the originals 

Rich

[RC1947]

Thanks for the info.  All I would need is one copy of each from a printer, the rest I would use a copy machine. RC