Bought a new Crosman 1377! Let the mods begin? Someone take my money?

[cpu77]

After 20yrs of non use mostly due to bad seals I final pulled my old Crosman 760 out of the safe.   I decided maybe I would throw some upgrades at the old girl.     So as I tried to find custom parts for the 760 I kept finding articles about how the 1377 had a huge aftermarket.  Maybe the largest of all air guns.   Well me being a mall ninja I bought one:)   

After receiving it I am finding it hard to buy parts?   Most of the shops listed in places are closed or have their websites shutdown.  Maybe its me or the economy really hit that nitch market.   At least the parts I want such as replacing all the plastic with metal...

Safety Brass or metal
Trigger Brass Or Metal
Sear spring plunger
breech (Other than Crosman's) BTW it's in stock I bought one for a 1322 project next.
Metal Barrel Band With Sight 
Some nice wood by Micheal in Forida?

I can find FT Valve
Longer Barrel
Bolt

[gdm620]

Don Cothran has a lot of stuff to offer.  http://www.cothranmachine.com/

Gmac also has some of the stuff you are looking for.  http://www.gmaccustomparts.com/epages/BT3197.sf/en_GB/?ObjectPath=/Shops/BT3197/Categories

There are others out there. You just have to keep searching to find it.  I'm planning on trying to make my own parts for most of my customization.  Good luck on your quest.

[gdm620]

This link is a couple months old but maybe you can contact him to see if he still has any left.
http://www.network54.com/Forum/278474/message/1318353635/13xx+Sighted+Barrel+Bands+are+Ready+to+Ship.

[cpu77]

Gary,

Thanks so much!   I think I was confused....   I did not realize the parts I want interchange with the Crosman 2240.   I had looked at those sights and many others but most do not mention the 1377 just the 22XX.   I actually was going to post that I bought the wrong pistol:)   I am sure this has been asked a bunch of times but which parts are not interchangeable?

[mr007s]

Mellon Air can source you a barrel and flat top valve and piston, possibly other goodies.
Crosmoda has some parts you may want to take a look there.
I have a Hawke Red Dot I am going to part with soon.

[eric]

as you can see the tubes are different in size and makingas well as the internals are different in size and design ---- the trigger frame and internals as well as the breech,bolt and probe will switch without any trouble(you will need the proper probe for the barrel though) .the barrel depending on length might pose a problem depending on which way you go with it . the sights(front and rear) on the 2xxx will work on the 13xx but the front sight on the 13xx will not work with the 2xxx as the barrel band will not work with the 13xx.thanks to gil for the photos

[Smaug]

Maybe this will be of help to you.

http://www.crosman-air-pistol-owners-forum.com/board/index.php?topic=5425.0

[gdm620]

Maybe this will be of help to you.

http://www.crosman-air-pistol-owners-forum.com/board/index.php?topic=5425.0

That is some write up there and with pictures.  How can you get any better then that.

[gdm620]

Nice cut away Eric.  That ought to help person out.

[breakfastchef]

I just made a brass safety from a brass screw last week. All you need is a drill press and some files. If I can do it, most anyone can, too.

[Mo]

That cutaway picture is very helpful, thanks Eric!

[cpu77]

You guys suck!   After looking at your links and posts!  I now think I need a 1322, 1325, and a 2240!

[Nightshade]

Whoa!!     Awsome info! 

If this isn't a sticky yet it should be!