1389 pump arm????

mcc1961 · February 22, 2012, 06:22:25 PM

Does anyone have a pic of a 1389 pump arm.Mike

0351_Vet · February 22, 2012, 06:37:12 PM

http://www.crosman.com/pdf/manuals/crosman/1389/C1389-EVP.pdf

Page 2, Right Click to rotate.

JEBert · February 22, 2012, 07:08:05 PM

Here are two my two 1389 forearms.
Cheers,
Jerry

0351_Vet · February 22, 2012, 07:26:14 PM

Bert,

Do you have a close up of the flash hider of the CAR?
What flash hider is that? And how does that mount up?
Looks good. Thnaks.

JEBert · February 22, 2012, 07:57:08 PM

Not at the moment. I can take a pic and get it on here soon. The flash hider is a cheap one I got online. It is for a Ruger 10-22. It is too big ID and I made a bushing from a hot water pvc pipe. You can see the tapered part of the bushing at the rear of the hider. The hider is held on with a setscrew.
Cheers,
Jerry

0351_Vet · February 22, 2012, 07:59:47 PM

Thanks Jerry.

JEBert · February 23, 2012, 01:33:24 AM

You are welcome!
Here are a couple of pics. You can see the slot that is supposed to straddle the front sight of the Ruger 1022. So, I have it on upside down to sort of hide the slot. That leaves the setscrew on the top. I need a shorter setscrew or make me up an 8-32 threaded front sight post. You can also see the bushing I made from a piece of hot water pvc better in these pics.
Cheers,
Jerry

0351_Vet · February 23, 2012, 01:41:38 AM

Thanks Jerry, Looks Cool.

byhsu · February 23, 2012, 07:27:55 PM

If I order the 1389 pump arm for the 1377, will the pins fit or do I need to buy the pins for the 1389? is it a simple swap of pump arm for pump arm only?

Thanks

0351_Vet · February 23, 2012, 07:34:04 PM

Quote from: byhsu on February 23, 2012, 07:27:55 PM
If I order the 1389 pump arm for the 1377, will the pins fit or do I need to buy the pins for the 1389? is it a simple swap of pump arm for pump arm only?

Thanks

Buy the extra pins, they are cheap. Your other pins should work fine. Do a search and there is a whole thread on 1377 mods. Check December.
Get the right size drift pin, and yes the 1389 Forearm, (not pump arm or lever) will work fine. Cheap too.

byhsu · February 23, 2012, 07:41:12 PM

I am talking about the black or dark green plastic, is that called the forearm?

Thanks

0351_Vet · February 23, 2012, 07:46:50 PM

Quote from: byhsu on February 23, 2012, 07:41:12 PM
I am talking about the black or dark green plastic, is that called the forearm?

Thanks

Yes. Black is the only one available. BackPacker Green has been discontinued.