• Welcome to Crosman Air Pistol Owners Forum.

FT piston and valve??

Started by mcc1961, March 14, 2012, 10:02:45 AM

0 Members and 3 Guests are viewing this topic.

eric

Quote from: 1377x on March 15, 2012, 01:39:10 AM
too bad he doesnt make adjustable stock pistons
has any one asked  ???
TOO many freaks and NOT enough circuses

AZAG

Quote from: eric on March 14, 2012, 08:59:37 PM
that would be a good question --- the maker of this one isn't producing items to sell anymore .he along with one other i know of that was making these aren't in business anymore .maybe you could get someone here to whip one up .maybe a "wtb" on the yellow or green or even here,but mines not going anywhere  :P :)

Dang... :(

Guess I need to dig up some scrap metal and whittle one up.

AZAG

Quote from: eric on March 14, 2012, 10:14:40 PM
ratite --- i forgot about him  :-[  his link to pp for a flat top piston pops up --- maybe email him http://www.airgunsmith.com/cros1377/cros1322-77.htm

There is also a brass piston listed there that uses that stock pump cup.

1377x

Quote from: AZAG on March 15, 2012, 06:38:35 AM
There is also a brass piston listed there that uses that stock pump cup.
thats what we are talking about!!! ;)
closed mouths dont get fed

DJammer

Here's mine.
One uses a stock cup. show beside it is the internal piece.
The other uses a pump cup from the 130. This cup was used in several Crosman pumpers.
A gun in the hand is better than a cop on the phone 
ΜΟΛΩΝ ΛΑΒΕ!

1377x

where did you get the 130 piston cup from?
closed mouths dont get fed

DJammer

Most of the usual suspects carry them, when you order a rebuild kit for a 130 a new one comes in it and I've saved them and send them in to get rebuilt when I get 5 or 6 laying around. Some suppliers want you to send in the old one and they will send it back with the kit, I don't know if that means they are getting scarce or what....
I've bought kits from both B&A and Rick @ Precision Pellet in the past
A gun in the hand is better than a cop on the phone 
ΜΟΛΩΝ ΛΑΒΕ!

1377x

Quote from: DJammer on March 15, 2012, 08:26:40 PM
Most of the usual suspects carry them, when you order a rebuild kit for a 130 a new one comes in it and I've saved them and send them in to get rebuilt when I get 5 or 6 laying around. Some suppliers want you to send in the old one and they will send it back with the kit, I don't know if that means they are getting scarce or what....
I've bought kits from both B&A and Rick @ Precision Pellet in the past
from what i have heard they are getting scarce
i can get the piston guide but to get the piston i have to pull teeth now
closed mouths dont get fed

0351_Vet

Are Mellon FT Piston & Values good?

I just picked a set up for $18  :-*
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ


1377x

Quote from: 0351_Vet on March 16, 2012, 06:02:33 PM
Are Mellon FT Piston & Values good?

I just picked a set up for $18  :-*
yes they are! you did good
mr.mellon stands behind his product.it uses the same o-ring as the outside o-ring of the valve
closed mouths dont get fed

0351_Vet

Quote from: 1377x on March 16, 2012, 06:29:54 PM
yes they are! you did good
mr.mellon stands behind his product.it uses the same o-ring as the outside o-ring of the valve

:-*

:-*

:-*
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ