FT piston and valve??

[eric]

too bad he doesnt make adjustable stock pistons

has any one asked 

[AZAG]

that would be a good question --- the maker of this one isn't producing items to sell anymore .he along with one other i know of that was making these aren't in business anymore .maybe you could get someone here to whip one up .maybe a "wtb" on the yellow or green or even here,but mines not going anywhere 

Dang...

Guess I need to dig up some scrap metal and whittle one up.

[AZAG]

ratite --- i forgot about him    his link to pp for a flat top piston pops up --- maybe email him http://www.airgunsmith.com/cros1377/cros1322-77.htm

There is also a brass piston listed there that uses that stock pump cup.

[1377x]

There is also a brass piston listed there that uses that stock pump cup.

thats what we are talking about!!!

[DJammer]

Here's mine.
One uses a stock cup. show beside it is the internal piece.
The other uses a pump cup from the 130. This cup was used in several Crosman pumpers.

[1377x]

where did you get the 130 piston cup from?

[DJammer]

Most of the usual suspects carry them, when you order a rebuild kit for a 130 a new one comes in it and I've saved them and send them in to get rebuilt when I get 5 or 6 laying around. Some suppliers want you to send in the old one and they will send it back with the kit, I don't know if that means they are getting scarce or what....
I've bought kits from both B&A and Rick @ Precision Pellet in the past

[1377x]

Most of the usual suspects carry them, when you order a rebuild kit for a 130 a new one comes in it and I've saved them and send them in to get rebuilt when I get 5 or 6 laying around. Some suppliers want you to send in the old one and they will send it back with the kit, I don't know if that means they are getting scarce or what....
I've bought kits from both B&A and Rick @ Precision Pellet in the past

from what i have heard they are getting scarce
i can get the piston guide but to get the piston i have to pull teeth now

[0351_Vet]

Are Mellon FT Piston & Values good?

I just picked a set up for $18 

[1377x]

Are Mellon FT Piston & Values good?

I just picked a set up for $18 

yes they are! you did good
mr.mellon stands behind his product.it uses the same o-ring as the outside o-ring of the valve

[0351_Vet]

yes they are! you did good
mr.mellon stands behind his product.it uses the same o-ring as the outside o-ring of the valve