• Welcome to Crosman Air Pistol Owners Forum.

What's missing?

Started by Old Skool, June 06, 2012, 06:22:51 AM

0 Members and 2 Guests are viewing this topic.

Old Skool

I was so excited to get some new bling in for my stock 2240 from GMAC Customs!  I have put the new brass trigger, crossbar, brass fill cap and new stainless screw upgrade, and new steel breech with hollow brass bolt and handle! 

The breech seems to be missing a plug? 

Did I miss something or was I shorted an item? 

There is also to allen head set screws in the steel breech. What is the correct scope rail to fit this or is there are certain length the scope rail should stay within?

Just plinking around!

1377x

does your breech have a rail?
if it does 3/8 dovetail rings or 11mm common .22lr rings
if you order a steel breech kit from crosman it comes with an end plug
or you can pm crosshairs see what he has for brass breech plugs
closed mouths dont get fed

Old Skool

#2
Quote from: 1377x on June 06, 2012, 07:41:59 AM
does your breech have a rail?
if it does 3/8 dovetail rings or 11mm common .22lr rings
if you order a steel breech kit from crosman it comes with an end plug
or you can pm crosshairs see what he has for brass breech plugs

It does not have a rail but the top of the breech has to tapped and threaded holes and they sent to grub screws.  I assume this to add a rail If I do desire. 

What's up with NO plug??  I could see if you were changing a breech with a plug already installed by seems a little ify they sent nothing at all!
Just plinking around!

Fronzdan

#3
Those two grub screws are to hold the barrel to the breech.

Some aftermarket steel breeches don't come with a plug.  One of my 2240s with a Crooked Barn breech is plug less.  It's not really necessary, but you can have one made for you. 

quickster47 †

As far as I know the Crosman breech and the Don Cothran breech are the only two that come with plugs for the rear end of the breech.  All others are plugless.  Could be wrong but that's what I've found so far.

And as mentioned, the plug is not necessary, only a nicety.

Carl

I've never wanted something so useless in my life.
In Omnia Paratus
1947-05-19 - 2016-07-14 †

droid

The plug was included in my GMAC brass breech kit.
Perhaps included in some kits and not others.
That said I left the plug out anyway.

Gary
Full Brass 2240, Custom 2300s, Custom 2250XL, Custom Beretta PX4 Storm, Custom SAI 1911 MEU
www.ratbuster.co.uk

Cross Pistol Packer

Fitted the brass plug in my Gmac breech,had to cut a little off of it so cocking knob (1389) could sit back in home position ok
Looks good through.
The Crooked Barn alloy breech on my 2260 is solid at rear end.
Crosmans, start as a hobby,then an obsession...

droid

For what it actually does I would prefer a rubber bung rather than a solid cap. (Especially on a black breech which I am using)
I will have to search one out.
Gary
Full Brass 2240, Custom 2300s, Custom 2250XL, Custom Beretta PX4 Storm, Custom SAI 1911 MEU
www.ratbuster.co.uk

Fronzdan

Quote from: Cross Pistol Packer on June 06, 2012, 06:12:30 PM
The Crooked Barn alloy breech on my 2260 is solid at rear end.

Is that the "hex" version?  My "ambi" breech didn't have one.

Cross Pistol Packer

Quote from: Fronzdan on June 06, 2012, 08:59:04 PM
Is that the "hex" version?  My "ambi" breech didn't have one.

Yes the Hex version.
Crosmans, start as a hobby,then an obsession...

Nightsniper52

If anyone finds a Plug for that breech hole.let me know where you got it Please!     Thanks Jeff   ;)

arkmaker †

Can always order one from Crosman?

Part Number         Description
AS2250-020        Breech Plug
I Am A Natural Mad Air Gunner  -  Full Of Hot Air & Ready To Expel It Quickly!

114 Rifle, 2240XL Pistol, 1861 Shiloh Pistol, 357 Pistols, Titan GP Rifle, PM66 Rifle, 2400KT .177 LW Carbine, CZ T200 Rifle, Benjamin Discovery .177 Rifle, Hammerli 850 Air Magnum in .22

Nightsniper52

Thanks for the Part #   :-*