p-rod breech

[1377x]

this may have been didcussed before i am going to ask
what makes the p-rod breech not work on a disco tube?

[0351_Vet]

4 Breech Screws........

[1377x]

4 Breech Screws........

to mount it?

[0351_Vet]

to mount it?

Yes............

[1377x]

i was looking over the evp and it would be too much hassle better off getting a bnm breech

[BDS]

So... on an assy drawing, a dotted line shows the components mating feature or "home".

Those 4 screws go into the breech but... I don't see where they go into below the breech? No dotted lines.

Also, the tube picture doesn't show 4 threaded holes to receive the screws, odd... 

Here's the P-rod pic, is there other stuff goin on inside of the breech that those 4 screws might contain?

[Fronzdan]

They just screw into the tube.  At least that's how it is with the M-rod.

[0351_Vet]

They just screw into the tube.  At least that's how it is with the M-rod.

They actual screw into the Valve Body (40).
Also the breeches are different sizes for the P-Rod vs the m-Rod.

[BDS]

A hah, now it makes sense, THRU the tube and into the valve body 

[0351_Vet]

A hah, now it makes sense, THRU the tube and into the valve body 

Brian, Exact-a-akk-ly.........