.22 cal. barrel - what do I have?

[chongman]

I got this .22 cal 10" barrel off of ebay awhile back. It looks really nice, clean, no rust at all.

Here's a couple of photos in the hopes someone can identify it's origins.





Trying to get together a 2240 to test fire the barrel but I need a few parts for it...working on it!

[1377x]

a pic of the leade and transfer port hole on the barrel will help
it could be a cut down disco barrel which is basically a 2260 barrel

[chongman]

I hope this will do. i had the shakes last night and worse this morning so my photos suffered...it's the meds man 

[eric]

  a disco barrel 

[Crosshairs]

It sure looks a crosman barrel to me I don't think I have seen that type of break before.

[chongman]

It sure looks a crosman barrel to me I don't think I have seen that type of break before.

The break and sight were what sparked my interest.

[BigErn]

Cool barrel chong. It does look like a disco barrel with that wedge on the bottom for the tube.

[0351_Vet]

Disco Barrel.....Could be.
The front sight is definitely a Disco. 

[1377x]

even with your shaking you take a better pic than i do.i shake and wobble these days mostly due to the meds and loss of muscle from 3 months bed rest
back to the barrel
it looks like a crosman leade and barrel t/p.the front sight is definitely from a disco
so it could be a disco barrel which is the same as a 2260 barrel except there is a flat milled on the top of a disco barrel probably for the rear sight
is there a flat milled on top of the barrel?
meaning on the opposite side of the transfer port which would be the bottom.just trying to be as clear as possible
if there is no flat then it could be a 2260 barrel cut down or a 1322 barrel,if its a 2250 barrel then there should be a dimple on the top of the barrel for the barrel band set screw.im sure the dimple on a 2260 barrel would be cut off seeing the barrel is 10"

[chongman]

Well, I took about 10 pictures to get that one! Dang if we're not having a tuff time of it.  I got the shakes from the meds and my kidneys are hurting this week because of the meds too  Somebody told me once "better living through chemistry".... Sometimes I don't think so  Hang in there man, we'll get better!

There's no flat milled on the barrel but there is a dimple for the barrel band.

[breakfastchef]

Somebody told me once "better living through chemistry"...

I believe they were referring to 'different' chemicals. Hang in there!

[1377x]

Well, I took about 10 pictures to get that one! Dang if we're not having a tuff time of it.  I got the shakes from the meds and my kidneys are hurting this week because of the meds too  Somebody told me once "better living through chemistry".... Sometimes I don't think so  Hang in there man, we'll get better!

There's no flat milled on the barrel but there is a dimple for the barrel band.

you took the words right out of my mouth.now i know that im not the only one that feels that way.i have been on these meds only 8 months and think daily this going to be the rest of my life.im hanging in there
  the dimple is it closer to the end of the  barrel? or closer to the breech? now that its been narrowed down to a 2250 or 2260 barrel
more importantly have you tried it out yet?

[chongman]

The dimple lines up just right for a 2240 barrel band.

I'm going to shoot it this weekend..see how it goes and will let you know.

[1377x]

The dimple lines up just right for a 2240 barrel band.

I'm going to shoot it this weekend..see how it goes and will let you know.

could possibly be a custom shop barrel then,unless someone made the dimple
stock 2250 and 2260 dimple are not anywhere close to the 2240 dimple

[0351_Vet]

We'll all get better.....I  promise.