WHAT's IN YOUR FEDEX/UPS TRUCK?

[1377x]

Brown Santa just left this, Crosman mod 108 Town & Country... oh ya

Arguably the best made pumper Crosman ever put together

what?? you scored a 108?? congrats
there was one for sale here at the shop with a very nicely refinished stock on it it was great to actually hold one

[RC1947]

Brown Santa just left this, Crosman mod 108 Town & Country... oh ya

Arguably the best made pumper Crosman ever put together

Man, that's nice.   :-*RC

[YSYEO]

My Mellon order just shipped!

1 13XX FT piston
1 13XX Solid Pin Kit C-Clip
5 Extra Solid Pin reinforcing rings
5 Extra Solid Pin Bushings

The extra rings and bushings are to use with standard Crosman pins to beef up some of my vintage pumpers while maintaining a stock appearance.

For those keeping track, this order was placed 10-27-12.

[WyoMan]

My Mellon order just shipped!

1 13XX FT piston
1 13XX Solid Pin Kit C-Clip
5 Extra Solid Pin reinforcing rings
5 Extra Solid Pin Bushings

The extra rings and bushings are to use with standard Crosman pins to beef up some of my vintage pumpers while maintaining a stock appearance.

For those keeping track, this order was placed 10-27-12.

Excellent! will be interested in how the bushing work out - thanks 

[1377x]

Excellent! will be interested in how the bushing work out - thanks 

im using my bushing as a transfer port

[WyoMan]

im using my bushing as a transfer port

Holy Cow - 0.188" you moving some air 

[Tater]

My wife "allowed" me permission to open my gift (TKO) early.    Just opened it up!!!!

It's for my 1377, but the instructions that came with it are for a Disco and Crosman 22xx. Is this normal or did I get the wrong one? 

[breakfastchef]

My wife "allowed" me permission to open my gift (TKO) early.    Just opened it up!!!!

It's for my 1377, but the instructions that came with it are for a Disco and Crosman 22xx. Is this normal or did I get the wrong one? 

This is normal. Mike puts his details into his products, not the instruction sheets. The LDC will be a tight fit. A little Pellgun oil on the barrel can help with the installation. Do not fully tighten the set screws until you have fired several rounds through the gun. Make certain no pellets are clipping the LDC. When you are satisfied with the position of th eLDC, tighten the set screws.

[Tater]

Thanks Lar, I was worried.   

[BDS]

Thanks Lar, I was worried.   

+1 to Larry's comments, and I don't even use the set screws on my 2300 with the Walther barrel, it's plenty snug w/ out e'm, just oil the barrel up and wipe down, same for the I.D. of the TKO

[1377x]

  Holy Cow - 0.188" you moving some air 

thats the little transfer port my other guns use .250 and the other is .316 or something like that.have to check

[Trophyhunter49]

 Got a new BSA red/green dot sightin today,2 flat top pistons and valves , scope mount for my 1400 also today.

[arkmaker †]

Not really AG related, but the truck did come. Brought me my long awaited insiders guide for my Challenger and 1000 FMJ projectiles.


Yesterday, I got my Maple Grips!! Now I need a new 2240 to mount them on 

[droid]

Got a nice 600 arrive today

[YSYEO]

Got a nice 600 arrive today