WHAT's IN YOUR FEDEX/UPS TRUCK?

[Bazmati2020]

Any way to discharge gas first though? Don't like idea of touching while charged.  I have number of a top man so ringing him tomorrow to see if any ideas.

[arkmaker †]

Just a dumb thought, but the 600 is a cap piercing gun right? Versus the valve piercing of a 2240 gun, so could it be a simple as flipping the cartridge 180 degrees?


See told you it was a dumb thought, but then I have been there when I had my 150 

[Bazmati2020]

Problem at the moment is it's gassed and locked up.

I believe I followed instructions to the letter (I was reading manual as I did it)
Pulled back slide to cock and pushed forward (swing out arm swung out)
Put pellgun oil on cartridge
Put cartridge in butt first
Tightened cap
Opened cap a little
Tiny hiss if gas
Went to dry fire as it said, nothing happens 

These are only threads similar I can find (but they don't say how sorted) but they both say gassed without cocking, I swear I did but who knows maybe I did wrong?.  Having said that in one Tim Mac1 says should still be able to civil but I can't

http://www.network54.com/Forum/275684/thread/1242744426/How+do+I+de-gas+a+Crosman+600-
http://www.network54.com/Forum/79537/thread/1239315962/Crosman+600

Update: it's working! So first caveat I think it was me  so it seems that it was kind of half cocked.
The follower was out and the slide loose as if cocked, but sear not engaged.
I went to look again this morning and again checked feed, slide etc.  and thought although slide free moving it's not fully cocked I'm going to try pushing the slide further.  Put of gentle force and click.  Pull trigger and bang 

So maybe half cock is really that Hammer stick part way back, not enough to engage sear but enough to make follower pop out.
So I'm saying my fault cocking needs to go back further and all is good.  Next is load her up and have a blat

[droid]

Done good today, got a polished and tuned CP88 with Holster and a Mk3 Alecto 

[Bazmati2020]

Very nice Gary, I've handled that CP and the polish job makes it much nicer & realistic in the hand.

The Alecto mk3's are great, full UK power, very accurate, no co2 needed and can fit a doofer too

I had a very small steel item arrive, fitted straight away though 

[kev02]

I should have some RWS R10 pellets coming for my 1377
atb kev02

[KevinP]

Have a PA order coming in ...   


Crosman Pellgun oil   PY-A-222   2   $2.99
MTM Case-Gard Predator Shooting Rest, for Rifles & Pistols   PY-A-4006   1   $43.95
Hawke Sport Optics 2-Pc Adapter, 3/8" to Weaver Rail    PY-A-4162   1   $24.99
End seal 357/CO2 guns   PY-A-3832   3   $4.95
H&N Crow Magnum .22 Cal, 18.21 Grains, Hollowpoint, 200ct, 5.5 mm   PY-P-732   1   $0.00
H&N Hollow Point .22 Cal, 12.65 Grains, Hollowpoint, 200ct, 5.5 mm   PY-P-742   1   $0.00
H&N Field Target .22 Cal, 16.36 Grains, Domed, 200ct, 5.5 mm   PY-P-743   1   $7.95
H&N Baracuda .22 Cal, 21.14 Grains, Round Nose, 200ct   PY-P-18   1   $7.95
H&N Baracuda Power, .22 Cal, 21.14 Grains, Round Nose, 200ct, 5.5 mm   PY-P-979   1   $8.95
H&N Baracuda Hunter, .22 Cal, 18.21 Grains, Hollowpoint, 200ct   PY-P-980   1   $9.95
Air Arms Falcon .22 Cal, 5.52mm, 13.43 Grains, Domed, 500ct, 5.52 mm   PY-P-716   1   $13.50
JSB Match Diabolo Exact Jumbo RS .22 Cal, 13.43 Grains, Domed, 500ct, 5.52 mm   PY-P-719   1   $14.99

[Tater]

Well, that will hold ya for a week or so Kevin, then what?   

[targettgii]

Well just took a plunge into the shallow end of the pool head first PA order. I did save $173.41 with coupon the gun with scope and rings and 1 tin of pellets were a bundle so that saved me some money too.

Items ordered:
ITEM: Benjamin Marauder PCP Air Rifle, Synthetic Stock
CALIBER: 0.22" (5.5mm)
MAX VELOCITY: 1000 fps
STOCK: Synthetic
GRIP ORIENTATION: Ambi
COLOR: Black
QUANTITY: 1
PRICE per UNIT: $519.99

ITEM: CenterPoint Optics 4-16x40 AO Adventure Class Rifle Scope, Illuminated
Mil-Dot Reticle, 1/4 MOA, 1" Tube, See-Thru Weaver Rings
QUANTITY: 1
PRICE per UNIT: $94.95

ITEM: Tech Force 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap
QUANTITY: 1
PRICE per UNIT: $11.99

ITEM: BKL 1" Rings, 3/8" or 11mm Dovetail, Matte Black
QUANTITY: 2
PRICE per UNIT: $19.50

ITEM: BKL Scope Bubble Level
QUANTITY: 1
PRICE per UNIT: $19.00

ITEM: Shooting Chrony Alpha Master Chronograph, Red



QUANTITY: 1
PRICE per UNIT: $119.99

ITEM: Beeman Kodiak Extra Heavy .22 Cal, 21.14 Grains, Round Nose, 200ct
QUANTITY: 1
PRICE per UNIT: $0.00

ITEM: RWS Superdome .22 Cal, 14.5 Grains, Domed, 250ct

QUANTITY: 1
PRICE per UNIT: $8.99

ITEM: Beeman Field Target Special .22 Cal, 14.66 Grains, Domed, 200ct
QUANTITY: 1
PRICE per UNIT: $9.25

ITEM: Benjamin Discovery .22 Cal, 14.3 Grains, Hollowpoint, 500ct
QUANTITY: 1
PRICE per UNIT: $10.95

[breakfastchef]

Well just took a plunge into the shallow end of the pool head first PA order.

Dude goes in big! Nice order, Tom. You know a mandatory range report will be expected. How will you be filling the Syn-Rod?

[targettgii]

Hand pump for now bottle feed in the future. Was looking at the AA200s but got more gun with the syn-rod plus a lot more for less.

[Davio]

Well, I need a mill.  And I need a second / larger lathe.  So I convinced myself I needed this.    Should get it in about a week.

[Tater]

WOW!! Money is flyin' today!
Nice orders guys.

[HappyHunter]

That's a pretty sweet setup, Davio 

What size is the lathe?

[Davio]

That's a pretty sweet setup, Davio 

What size is the lathe?

It is the new Grizzly G0769 lathe with milling head.  The lathe is an 8x16.  Two 3/4 hp 110V motors only pull 17 amps combined and are both variable speed (no gear changes). It even has DRO on the lathe rpm's already. 

It will cover everything I need to do with it. Lots of my tooling from the smaller lathe will work on / with it.  The mill will open lots of breeches doors for me.