LOST

[1377x]

  I thought about not puting the safety back in the gun, gut there will be a hole where the safety went. That want look to cool. What to do

look at crossliners 1377 he put screws with ball bearings in them to cover the holes
personally i dont need a safety, none of my firearms has a safety and havent had any mishaps yet,nocking on wood. keep your finger off the trigger and no mishaps will happen

[pirouge]

  the dreaded safety spring, here's what I do, I super glue the ball to the spring, then insert the spring into its channel and slide the ball down in place. BUT, I have extras just in case things go awry and the cats not watching. Don't use any air gun with out a safety, if not for you, then for someone else. I order my parts from ABairguns, good service and cheap.

[ki0cn]

I shoot left hand and the safety is in the way of my trigger finger so I don't use the safety. I plug the holes with 3/16 black plugs I get from lowes.
Randy

[1377x]

nice job!

[Trophyhunter49]

Now I like that 

[crossliner]

Yes black is cool  ..I plugged mine w/ ss 4mm allen domehead screws..The head is about 7.5mm..Did a bit of drilling to remove the hex so now it has a steel ball sitting nice and tight.

[KevinP]

Yes black is cool  ..I plugged mine w/ ss 4mm allen domehead screws..The head is about 7.5mm..Did a bit of drilling to remove the hex so now it has a steel ball sitting nice and tight.

That looks way cool  !!!!

[crossliner]

Thank you Mr. Kevin but now I am no longer using them..Got ss and brass safeties already. Best regards.

[1377x]

what size ball is in the screw?

[crossliner]

3mm steels balls Mr. 13..2.5mm is also nice actually that is what I used on my 2400kt...