LOST

[Trophyhunter49]

  Oh no I lost my safety spring and ball. O well I guess I'll go safetyless on this one

[1377x]

common problem
a disposable lighter flint spring and 3/32 ball bearing will replace that
i used a safety detent pin out of my beretta 92fs for the lost ball
if you have a pin with ball head that can be used also if the ball is small enough to fit in the slot.just cut the pin down and it will be like a spring guide

[Trophyhunter49]

  Will give it a try

[laptopdragon]

break out the magnets and search for that thing.

or, shop vac your whole room and magnet the contents of the shopvac

(dont bother asking me how i know) 

[cmj21973]

Buy 3/32" ball bearing, off of Ebay, in bulk.

Although I did lose 99 of them at one time, when I miss place the ziplock bag.
I did find them later, in my airgun parts box, only after order 500 more.


Corrected safety ball size.

[crossliner]

I dunno why but just today I forgot to mount the spring and steel ball and my safeties still work fine..They are a bit over in size though I instructed the machinist to make them slightly fatter. Best regards.

[chongman]

  Loove those breech end caps!

[arkmaker †]

I've used shirt pins as a back up when I lost the ball. The ones with the round head. Clip the pin off so ther is only about 1/8" left and guide it into the spring. Works like a charm until you can get another bb

[Colt25]

You really don't need safetys in any airgun. The safety is between your ears.

[Trophyhunter49]

You really don't need safetys in any airgun. The safety is between your ears.

That's rite

[laptopdragon]

Buy 3/16" ball bearing, off of Ebay, in bulk.

Although I did lose 99 of them at one time, when I miss place the ziplock bag.
I did find them later, in my airgun parts box, only after order 500 more.

[JEBert]

Buy 3/16" ball bearing, off of Ebay, in bulk.

I know this is just a misprint but to make sure no one reading this in the future uses this info to order the wrong size, the correct size is 3/32" NOT 3/16".
Cheers,

[1377x]

I know this is just a misprint but to make sure no one reading this in the future uses this info to order the wrong size, the correct size is 3/32" NOT 3/16".Cheers,

lets say that again and make it noticeable

[JEBert]

Thanks, Ed.  Don't want to steer anyone wrong if I can help it.

[Trophyhunter49]

  I thought about not puting the safety back in the gun, gut there will be a hole where the safety went. That want look to cool. What to do