What work did you just do?

[ped]

Had another tinkle with the trigger and sear.  Removed one of my shim (Pringles lid cut out) from trigger, reinstalled the crosman spring.  Filed and dremeled the sear at touch points again.

Feels better, still not how I'd like but it does seem each time it gets a little better

I was looking at the hammer and that's kind of calling to me to give it a polish, is this advisable? Looks rough in the tube (viewed from below when side plate off.  Thinking it will hit smoother?

i always polish the hammer and use alot lighter spring
ped

[7624452]

Stock mod. 

[breakfastchef]

Stock mod. 

Nice job.

[targettgii]

Only Kidding with you Kevin. I have trouble figuring out how to add links.

[Tater]

I saw that thread about the two-piece BB, it looked like a really cool idea. No money or I would have gotten one too. Nice to hear they work well for you.

[targettgii]

They do Tater it's a very nice piece lite but strong.

[breakfastchef]

Tried something new for my Bling On A Budget Build (BOAB). Also did my first cut and crown for the same build.

[quickster47 †]

chef that is very nice work.  Did the crown pass the Q-Tip test?

Carl

[targettgii]

That cut and crown came out nice and I love what you did with the grips.

[breakfastchef]

Are you asking because your critical eye saw the little bit of fiber/hair in the photo? The crown did pass the Q-tip test, but I haven't shot any pellets through it yet.

chef that is very nice work.  Did the crown pass the Q-Tip test?

Carl

[chongman]

Very nice barrel work and the grip "medallions" ... fine touch 

[quickster47 †]

Are you asking because your critical eye saw the little bit of fiber/hair in the photo? The crown did pass the Q-tip test, but I haven't shot any pellets through it yet.

I did see that fuzz and stuff.  One thing I have learned about macro or up close pictures is that it is best to keep a can of Dust-off or CO2 around so you can blow off the parts before taking the pictures.

Amazing what those macro lenses can see. 

Carl

[arkmaker †]

Nice work Guys. Like the stock and grips! Must have been a magnifying glass hour to get the detail and 3 colors 
The crown looks great...bet she shoots just fine!

[Bazmati2020]

i always polish the hammer and use alot lighter spring
ped

Thanks Ped

[Brent]

Stock mod. 

Look great Al!!
Nice workmanship!!
Liking that cheek rest allot!