What work did you just do?

[crossliner]

No Mr. Vet and Mr. BE they are cerakoted SolarForce/Surefire pieces..Best regards.

http://www.candlepowerforums.com/vb/showthread.php?323335-Cerakote-pics-thread-All-lights-brands-and-shops-lets-see-them!

http://www.malkoffdevices.com/

[BigErn]

No Mr. Vet and Mr. BE they are cerakoted SolarForce/Surefire pieces..Best regards.

http://www.candlepowerforums.com/vb/showthread.php?323335-Cerakote-pics-thread-All-lights-brands-and-shops-lets-see-them!

http://www.malkoffdevices.com/

Wow! Now I have seen it all, a forum for flashlights!!!!! 

[crossliner]

Yes Mr. BE..Some of the guys there spend $30k in less than 6 mos to feed their habit..I think the most expensive piece is the TRI V at almost $3k if you are not a member of the forum. Best regards.

http://www.malkoffdevices.com/

[Davio]

Wow! Now I have seen it all, a forum for flashlights!!!!! 

... used to be the candles forum... 

[crossliner]

Haha exactly Mr. Davio

Mr. BE I know you are fond of tan I have rather had 1 in my collection but around 19 of my babies ( all in pristine condition)  got stolen I am still having a hard time accepting it up to now..It is a Solarforce w/ an L2 ECR single CR 123/RCR 123 body equipped w/ an R5 module so it's super bright..Solarforce flashlights are like Crosmans cheap and easy to upgrade. Best regards.




Here he is beside my Surefire Z2 also w/ an upgraded R5 led module module.

[YSYEO]

I made this aluminum (aluminium to some of you) thingy.   I'm going to let you guess it's purpose, but will say that it is the same diameter as a 12g powerlet, and is to be used with a gun I currently own.   Also, although it is cylindrical, it is not an unmentionable or otherwise illegal device.

[0351_Vet]

I made this aluminum (aluminium to some of you) thingy.   I'm going to let you guess it's purpose, but will say that it is the same diameter as a 12g powerlet, and is to be used with a gun I currently own.   Also, although it is cylindrical, it is not an unmentionable or otherwise illegal device.

I'm guess a forward M4 vertical Power-let holder, piped back to the valve,
so you have twice the gas on-board and ready to roll. 

[Tater]

Wow! Now I have seen it all, a forum for flashlights!!!!! 

... used to be the candles forum... 

You guys seriously had me laughing out loud here. Thanks!!!   

[YSYEO]

I'm guess a forward M4 vertical Power-let holder, piped back to the valve,
so you have twice the gas on-board and ready to roll. 

It's actually a much simpler accessory for my 160.  It fits like this when in use:


It let's me shoot with one powerlet without the dead space in and around the empty dummy cart that is usually used to charge with a single powerlet.

[chongman]

That is a fantastic part

[1377x]

I made this aluminum (aluminium to some of you) thingy.   I'm going to let you guess it's purpose, but will say that it is the same diameter as a 12g powerlet, and is to be used with a gun I currently own.   Also, although it is cylindrical, it is not an unmentionable or otherwise illegal device.

there is no such thing as an illegal device that looks like that in the US not unless you mean pipe bXmX
if its the other thing you are talking about its a restricted device to correct not illegal

[DRAGON64]

I polished the trigger parts on my PC77 and added an empty 22LR shell as a spring guide... the trigger needs more work, but it is better.

[KevinP]

Installed a brass trigger and safety from GMAC on my 2400KT - nice stuff ... 

[BigErn]

Finally ran out of bedliner! I did all my bedliner projects with the same can  Oh well, at least I was able to do up one last set of grips. These are the 1701 grips from Crosman. They look great! I'm surprised more of you guys aren't using them to replace the fake wood 13xx/22xx grips.

[BDS]

Ernesto! What's the part number of those grips?

Me need e'm bad