What work did you just do?

[bgmcgee]

Looks like one sweet trigger. Put the crosman p-rod trigger on my 1377 this weekend and have to say it is the best mod so far. This trigger gets insainly light.

[Tater]

Very nice stuff there PC77 and cool looking trigger Motorhead.

[PC77]

Motorhead, Now that is a trigger! Is that a set trigger in front?
pc

[Motorhead]

Motorhead, Now that is a trigger! Is that a set trigger in front?
pc

Safety ...

Thanks ... Fun project for a rainy Sunday afternoon

[1377x]

did a whole lot today
converted my OOGIE BOOGIE tank to straight release air by removing the pin and spring from the bonnet/piston of the hpa tank
found i have a leak that wasnt present when it was running on co2 with the higher pressure the air slips right on through.figured that was going to happen because i forgot about the trigger group mounting hole and pushed the o-rings past it like it wasnt there
so i have to take it apart and put new o-rings in
need a gun to go pesting with so i put my don cothran/workinmanva stainless 2260pcp togetther using the the .22 24" croaman barrel
OMG!!! that thing sounds like a 9mm not a 22lr that has nothing on my dc/wmva combo it blew threw a 3/4in piece of cedar deck flooring like it was hot butter at 5m put my A STOREY LDC on it what a joke now it sounds like a .22lr down from a 9mm
im going to post a thread as soon as i load pics up

[mudduck48]

did a whole lot today
converted my OOGIE BOOGIE tank to straight release air by removing the pin and spring from the bonnet/piston of the hpa tank
found i have a leak that wasnt present when it was running on co2 with the higher pressure the air slips right on through.figured that was going to happen because i forgot about the trigger group mounting hole and pushed the o-rings past it like it wasnt there
so i have to take it apart and put new o-rings in
need a gun to go pesting with so i put my don cothran/workinmanva stainless 2260pcp togetther using the the .22 24" croaman barrel
OMG!!! that thing sounds like a 9mm not a 22lr that has nothing on my dc/wmva combo it blew threw a 3/4in piece of cedar deck flooring like it was hot butter at 5m put my A STOREY LDC on it what a joke now it sounds like a .22lr down from a 9mm
im going to post a thread as soon as i load pics up

Sounds like he is fleeing better.

[1377x]

i was feeling better after some much needed assistance
next i couldnt bend over without getting a head rush so employed some help from my nieces to get parts off the floor when they fell
OOGIE BOOGIE he's not feeling so good leaking out the bleed hole means tube sealing o-rings arent doing their job should be an easy fix now that i have dowcorning 111 silicone lube
gotta shine up my stainless steel 10/22 barrel for the new owner busy day tomorrow after my doctors' appointments

[BigErn]

Put a backward slant on the forestock of the Winchester. I always wanted a stock like that and I didn't really like the rounded front of the stock before. What do you guys think, did I screw up a nice stock 

[droid]

Today I have removed paint from one half of my Mac1 LD, wow that Imron paintwork takes some shifting.

Gary

[Davio]

Put a backward slant on the forestock of the Winchester. I always wanted a stock like that and I didn't really like the rounded front of the stock before. What do you guys think, did I screw up a nice stock 

imo... No, it looks great. 

[chongman]

definitely  appeals to me, it has that "in motion" look while sitting still. Well done 

[Fronzdan]

I've always liked the forward slant on the forend!  Looks cool.

[Davio]

Yeah!  Like a upside down tiger shark with those cool slits down the forearm.   

[1377x]

looks good bigern!
did the same thing to my ruger 10/22 factory stock

[ped]

not had much time to tinker much but i've managed to fit a new butt pad to my as2550 hpa and rebuild my xs79 hpa into its new custom stock(thanks sean)
ped