What work did you just do?

[Gippeto]

Sight pin looks good!

Just finished putting the .32 back together, filled and tested....I'm kinda stoked!



Al

[crossliner]

I made this from a stainless steel 8-32 pan head.....can anyone guess what it is 

I was gonna say earplug

[KevinP]

Sight pin looks good!

Just finished putting the .32 back together, filled and tested....I'm kinda stoked!

Al

As you should be ... that is awesome !!!

[quickster47 †]

Sight pin looks good!

Just finished putting the .32 back together, filled and tested....I'm kinda stoked!



Al

Gippeto, is your front fill device screwed into the tube or is held in with screws?  If screwed in did you make that fill device?

Carl

[breakfastchef]

Sight pin looks good!

Just finished putting the .32 back together, filled and tested....I'm kinda stoked!

Al: What kind of foot pounds is that pistol producing? Are you getting a fair bit of muzzle rise?

[Gippeto]

Thanks fellas.

Carl, the fill plug (brass piece) is a probe style fill (the stainless piece) which I made for this project. It is held by 3x 10-32 low head SHCS with the heads countersunk into the brass. Pretty strong setup IMO.

Pistol peaks @ 30ftlbs. Gets 6 shots on a 1700psi fill.

It pops a little.

Al

[WyoMan]

Nice work Al......exceptional power in a compact package  and without the extreme high pressure 

[arkmaker †]

I'll bet that one is fun, fun, FUN! 

[AS13]

Tired of the all black on my 2400KT so I figured a little paint was in order. Was in the mid 50's today, not the best for painting outside, but what the hell. I thought the contrast with the camo tan would look OK. I'm working on replacing (as finances allow) all the blued end caps, bolt handle and muzzle brake with brass parts. Should look good when It's finished.

[droid]

Well something was bugging me for a while, the P Rod trigger stood out on my all black 2550 so today I popped it out, gave it a clean up and blued it. 

Looks fine and dandy now 

[quickster47 †]

AS13 that is looking mighty fine.  I like the color combination and the brass pieces will give it some more class.

Carl

[quickster47 †]

Well something was bugging me for a while, the P Rod trigger stood out on my all black 2550 so today I popped it out, gave it a clean up and blued it. 

Looks fine and dandy now 

Yeah, well the picture you failed to post didn't give us much to see so we still be waiting to pass judgment.   

Carl

[droid]

Yeah, well the picture you failed to post didn't give us much to see so we still be waiting to pass judgment.   

Carl

Here you go Mr Q 

[droid]

Oh Bugger  I just noticed the hollow probe isn't black, that is a job for tomorrow now with the brass black liquid.

[JEBert]

Gary,
Red would look OK on that gun.
Cheers,