What work did you just do?

[arkmaker †]

Finished up the polished 2240 last night 
Will be posting up a few photos in the gallery later.
Rich

[Tater]

Finished up the polished 2240 last night 
Will be posting up a few photos in the gallery later.
Rich

Cool, I'll be lookin' for the pics. 

[BDS]

Another perfecto paint job Ern

[breakfastchef]

Not today but the last thing I did    I almost ruined this stock because of a stripped grip screw. The bedliner covered up the scratches pretty good after sanding    I always wanted to do this anyway, it feels great now.

SprayBoy is back with a vengeance. The stock looks very good!

[willc]

Got around to putting a steel breech on my 1322.
When I did my 1377 that kit had the shorter rear screw, this one did not.
I had to take a bit off with the Dremel.

So once I get that on I attach the rear sight that I ordered from Archer and the gun shoots high and I am maxed all the way down.
This calls for a 1/16 hole down the middle of the plastic blade and a cut off of an old bit for a pin sight.

Now the gun is shooting very nice.
Right now I just plan on replacing the sear spring and finishing up some wood grips and I may leave well enough alone for a while.

[Noah]

Quickster did some REALLY nice work to my 1325 and 2540 the other day. 'Just wish he would post pics along with a short report 

[quickster47 †]

Quickster did some REALLY nice work to my 1325 and 2540 the other day. 'Just wish he would post pics along with a short report 

NAG! NAG! NAG!  Geesh, what is wrong with this younger generation... 

Okay here is a picture I snapped the other day after I changed out his flat-top piston which had some trashed o-rings but was still shooting okay.  I also installed a new barrel band he had made because his .25 caliber barrel is 1/2" OD instead of 7/16" like Crosman barrels.  And while I was messing with the internals I replaced his pivot pin with a Mellon kit.

His .25 caliber is pretty slick now and hits really, really hard on 10 pumps.

Carl

More later on his 2540 which is an awesome hitting gun.

[KevinP]

Nice !!!!!!!!!!!!!!!! send it up here and I will brake it in for Noah 

[quickster47 †]

Here is how Noah gets his bling on. 

Added the brass barrel band and then donated, sort of, okay, I charged him triple, a mr007s brass tri-wing gas cap.  It is now starting to take shape and not sure what our next step is.

Open to suggestions.

Carl

[bgmcgee]

pretty nice, maybe a brass brake?

[KevinP]

Lookin good !!!   

[Noah]

Here is how Noah gets his bling on. 

Added the brass barrel band and then donated, sort of, okay, I charged him triple, a mr007s brass tri-wing gas cap.  It is now starting to take shape and not sure what our next step is.

Open to suggestions.

Carl

Mahalo nui loa (thanks a bunch!) for all of your time, efforts and expertise, Carl.

The "next" step is possibly making some open sights for the 2540?  'Anybody want to chime in? 

[crossliner]

It might want to take a swim in the creek lol! Seriously that is a dashing piece a brass tip is all it lacks  Best regards.

[quickster47 †]

The "next" step is possibly making some open sights for the 2540?  'Anybody want to chime in?

I'll see what I can conjure up in the lab for you my friend.

Carl

[Crosshairs]

I just painted a 2240 with this hammer paint it looks pretty cool but i don't think it will show up in pictures very well.
                            Mike