What work did you just do?

[Crosshairs]

Gun looks nice great idea I have a extra M&P 45 might do something like that.
Mike

[droid]

Just stripped my Archer maple grips to go on the Plain Jane gun, so I am in the process of applying ebony stain to them now. Gotta have black grips for my Plain Jane gun.

[cherokeesteve]

Gun looks nice great idea I have a extra M&P 45 might do something like that.
Mike

Thanks, those two pieces were about two weeks of sacrificed morning/lunch breaks at work. Let's see, go hungry or machine crosman air pistol parts? You can see what I chose.

[Jauvesst]

got around to installing the 2300s lw barrel and .177 ss extended hollow probe on my 2240. or is it a 1740 now? dont know what to call it anymore heh. in a few weeks i guess the only original parts left on the gun will be the valve at this rate
was gonna testfire but its been really cold the last week and when i sat down outside to try it out the wind started picking up quite alot. +8c and high winds arent the best for scope adjustement and accuracy testing i suppose

[Tater]

Nice shooter.    I like the grips too.

[breakfastchef]

got around to installing the 2300s lw barrel and .177 ss extended hollow probe on my 2240. or is it a 1740 now? dont know what to call it anymore heh. in a few weeks i guess the only original parts left on the gun will be the valve at this rate
was gonna testfire but its been really cold the last week and when i sat down outside to try it out the wind started picking up quite alot. +8c and high winds arent the best for scope adjustement and accuracy testing i suppose

Sweet 1740!

[Trophyhunter49]

  Super Nice shooter 

[bgmcgee]

Very nice jauvesst.

[BillK]

That is a good looking gun, Jauvesst.  Your going to have fun shooting that tack driver.

[Jauvesst]

thanks guys. im afraid im not done with it yet altho my wallet is screaming for mercy already

[Jauvesst]

made a home for it with a old suitcase

[BDS]

Nice... I like the fabric over the foam for the cut-outs, looks waaaay better than many that have the "dog chewed" effect in the foam! 

[Jauvesst]

that yellow foam crudely cut with scissors would look plain awful without the fabric

[Old Dog]

You have done an awesome job, gun, case and are an inspiration 

[eric]

just finished another 180 stock --- 7 coats tung oil(steel wool + soft nylon brush between coats), 1 coat satin finish poly(lightly sanded with 600 grit D/W paper then soft nylon brush),1 coat of clear polyurethane with a lightly sanding with the same paper