What work did you just do?

[crossliner]

Mounted the 'signed' pump arm made to match my grips 

The design is unique and nice 

[bgmcgee]

That's a nice set of grips you have there.

[BigErn]

Mounted the 'signed' pump arm made to match my grips 

Awesome and certainly different! Um... how did you mount that rear sight on a stock breech?

[bgmcgee]

Tore down and did a lube tune on the old Diana 45 I picked up a year or so ago.  Pretty well built springer. It was in real clean shape inside. The spring and leather piston seal looked like new. She seems to shoot a bunch smoother with a little moly on the piston and guide and some tar on the spring. I'm happy.

[Monkeydad1969]

I am going to replace one of my Disco valve springs with the copper color spring.



...to be cont.

[mr007s]

Cooked up a nice block of ballistic gel. Want to see what damage the Mr. Hollowpoint ,457 dia. 185 grain hollow points will do to it.

[Monkeydad1969]

Cooked up a nice of ballistic gel. Want to see what damage the Mr. Hollowpoint ,457 dia. 185 grain hollow points will do to it.

Me, too.

[GreyCoyote]

I put together a pseudo-Backpacker on Saturday.  Too many updated/upgraded parts to be able to call it a true Backpacker.

[mudduck48]

Nice looking rig, now lets see some holes in the target.

[ettolo]

Awesome and certainly different! Um... how did you mount that rear sight on a stock breech?

Thank you and the other for the kind words on my work!

I removed the standard sight, made little hole in the breech (there is a little alignment pin below the sight) and screwed the new sight with a longer screw. Had to reduce the screw head diameter to fit the slot in the sight. This rear sight is too high, so i glued a little piece of plastic in the front sight.
The sight is a cheap gamo  http://www.ferraioli.com/catalogo/774-tacca-di-mira-cfx.asp

hope this helps! 

[twigboy]

Mounted the 'signed' pump arm made to match my grips 

Hi,
Those are nice grips.  Oak?  I normally don't like oak but you have me thinking about it.

How did you mount the sight on the plastic receiver?  And did you do any work to make the receiver and barrel more stable for it?  Thanks 

[ettolo]

Thank you twigboy!
Yes that's a kind of oak... it is 'rovere' in italian (http://en.wikipedia.org/wiki/Quercus_petraea)
How to mount is written two post before this! 
I didn't do any further work, i'm waiting to buy a metal breech.
If you need more help I can take photos this monday

[beerhippy]

Slicked up the trigger on my 1377.  Ground about 3/32" off the bottom edge of the sear where the spring contacts it.  Also radiused the rear lower corner so it doesn't contact the spring.  Polised the contact points and lubed.  Made a nice improvement and tightened my groups.  Today I installed a backpacker forearm - much more comfortable pumping.  Other mods on order.

[GreyCoyote]

I finished setting up my 45 meter range down the hill from my house.  I hang targets on the line between the T-posts.  The drum is serving as my bench at the moment.  The side view is with the drum at five meters.  The long view is from 40 meters out.  Its not a lot to look at, but if any one is ever in Yakima, WA, let me know.   

[targettgii]

That's a nice looking home range GC.