Blown a gasket

[Trophyhunter49]

 I was workin on tha last 66 I got today. Got it back together ,shooting good and the gasket from the valve to the barrel blew out. Are they the same as 13XX. Found some on E-Bay but they were to high I thing!

[chongman]

Your talking about the transfer port or breech gasket, part number 130-036?

[Trophyhunter49]

  Transfer port! Don't know why I didn't say that. LOL

[1377x]

i think the 66 gasket is longer and the same as the 2100/760 gasket.i have one but i reorganized and cant find half the stuff im looking for

[Trophyhunter49]

 ED , I know that feeling

[Trophyhunter49]

i think the 66 gasket is longer and the same as the 2100/760 gasket.i have one but i reorganized and cant find half the stuff im looking for

ED I looked up that gasket for the 66,760 13XX they all have the same number. Are all of them the same or differnt by modle?

[1377x]

  ED I looked up that gasket for the 66,760 13XX they all have the same number. Are all of them the same or differnt by modle?

there are different gaskets the 13xx being the shortest for best sealing the next to the 13xx gasket is recommended
i'll show you
Most of us are familiar with the 2240 type transfer port, the ring and the little square cut seal. If by chance you've made a stop at your Crosman repair depot you may have seen various lengths of that square cut seal, I purchased a small assortment for tinkering. The longest is for the 1400, the two intermediate lengths are used in various generations of 760's and the shortest is used in the 22xx, 13xx, etc
i have the one next to the 2xxx/13xx gasket