What do BBs, Elmers Glue and 1377 Grips Have in Common?

[BDS]

Mix e'm all together and pour inside the grip halves and you have a HUGE improvement in weight and feel of the stock grips.

I just did this to my WallyWorld, $52 1377 and it's a totally different feel, much improved over that hollow, plastic toy feel 

[mr007s]

I like to fill the void in mine with folded up hundred dollar bills. That way the grips don't feel so cheap to me.

[arkmaker †]

I think there is a party at 007's tonight!!! 


I have never tried filling the grips, but maybe I should. You are not the first person to bring up the benefits of doing so.   

[chongman]

I like to fill the void in mine with folded up hundred dollar bills. That way the grips don't feel so cheap to me.

[Tater]

I like to fill the void in mine with folded up hundred dollar bills. That way the grips don't feel so cheap to me.

Classic.

[mudduck48]

Take the grip panels off, sell on ebay and put the 1399 sholder stock on, end of problem.

[Trophyhunter49]

I like to fill the void in mine with folded up hundred dollar bills. That way the grips don't feel so cheap to me.

[jSan22]

impressive!

[1377x]

I like to fill the void in mine with folded up hundred dollar bills. That way the grips don't feel so cheap to me.

[KevinP]

 

[Tater]

Do the grips weigh more with BBs anad glue than if stuffed with duct seal?

[jSan22]

Do the grips weigh more with BBs anad glue than if stuffed with duct seal?

most likely. steel bbs weight quite a bit in a large amount and glue can hold alot of them.

[Davio]

Substitute RTV for the glue and substitute pellets for the BB's and you will never be completely out of usable ammo (you know... in a pinch like when the zombies come).   

[Cross Pistol Packer]

May well try that on my WE airsoft Luger,the grips are thin & flex some.

[Tater]

Substitute RTV for the glue and substitute pellets for the BB's and you will never be completely out of usable ammo (you know... in a pinch like when the zombies come).