2260 tube

cheewee · November 17, 2012, 01:46:34 AM

anyone know of any parts suppliers selling 2260 tubes.
crosman is out and will not be re-ordering anytime in the near future.
couldnt even by a 24" barrel.
what about aluminum breeches anyone making a short version.

1377x · November 17, 2012, 05:34:26 AM

don cothran sells a stainless steel 2260 tube if you are going hpa the cost of the 2260pcp tube will cost a lot cheaper than the over priced tubes on ebay and the needed valve adapter
and its much stronger
crosman 2260 1500psi
dc2260pcp 3000psi+

cheewee · November 18, 2012, 07:34:22 AM

nope just after a regular tube. trying to not pay crazy ebay prices.

Mark5043 · November 18, 2012, 07:52:40 AM

B&A Has them..."2260 Tubes"

http://www.airgunbna.com/

A while back I think Greg @ Blue Fork Design was doing a shorty aluminum breech,or supposed to be doing one, if I can remember correctly.Could be wrong on that though...

Ask Joe @ HPA Sports...He'll know.
He's a friend of mine,and a great guy...

http://www.hpasports.com/

cheewee · November 19, 2012, 06:45:11 AM

perfect thanks, just hope there in stock. will find out tomorrow.
gregs talk about producing a short aluminum breech was what made me want one.

1377x · November 19, 2012, 07:44:54 AM

well if you cant get a 2260 tube at a good price
the dc 2260 set is abot $76 delivered and in stock when this post was made

Mark5043 · November 19, 2012, 09:02:02 PM

Quote from: cheewee on November 19, 2012, 06:45:11 AM
perfect thanks, just hope there in stock. will find out tomorrow.
gregs talk about producing a short aluminum breech was what made me want one.

Hey Jeff...just chatted with Joe,and they've got the breeches....

cohiba · November 19, 2012, 10:12:43 PM

I just received 2 24 inch barrels, i am not going to be using them after all. I would be more then happy to hook you up.

Part number 2260SE-001 i paid $15.58 each, just got them last week!

cheewee · November 20, 2012, 01:56:57 AM

Quote from: Mark5043 on November 19, 2012, 09:02:02 PM
Hey Jeff...just chatted with Joe,and they've got the breeches....

just shot him an e-mail.. thanks

Quote from: cohiba on November 19, 2012, 10:12:43 PM
I just received 2 24 inch barrels, i am not going to be using them after all. I would be more then happy to hook you up.

Part number 2260SE-001 i paid $15.58 each, just got them last week!

not familiar with that part number. 2260-003 is what i was looking at. anyone know if is compatable with a 22xx build?

thanks to everyone for all your help.

cohiba · November 20, 2012, 02:00:05 AM

This is for the discovery rifle. I am doing a 2250 to pcp conversion. I got these thinking thats what i wanted however i went with the standard 18 inch that the 2250 came with and used the BNM breech and shroud.

Let me know if you are interested. I also have 2 14.5 inch .22 cal barrels as well.

LOL my extra parts are building up like crazy.

cheewee · November 20, 2012, 02:11:45 AM

so will a discovery barrel fit on a 2240? forgive my ignorance

cohiba · November 20, 2012, 02:29:55 AM

i did notice that they except the same steal breech.

Unless someone else chims in different i would think so. If your looking for a steal breech i have one that came off my 2250 xe.

Just trying to help, but do your research to make sure. its no worries on my end. Ill return them to Crosman if i have to.

cheewee · November 20, 2012, 03:02:24 AM

sure am interested just need to confirm if barrel is the same. thanks, will get back to you.

1377x · November 20, 2012, 06:15:37 AM

as far as i know they fit
the only noticable difference is the flat for the rear sight

tinker · November 20, 2012, 10:25:59 AM

The Disco barrel is 7/16" but if it is for Disco the bluing doesn't go to the end, because of the decorative sleeve at the front of the disco breech. I also think the Disco barrels maybe a little better overall. Got a couple myself and haven't seen any lead or crown issues so far. I had the .177 up to 945fps and were accurate with CPHP 7.5 grain pellets. Not like the some 2260 Crosman barrels.