2289 Pivot Part Number???

[BigErn]

This thread is hilarious guys

[7624452]

Philosophical dissertation.

[K.O.]

I just found this thread while looking for the part #  the 2289 jiggermaddigger that holds the barrel and pivot for the pump...

[7624452]

I thought I'd never see this thread again.  The 2289 is the same as a 1322 except for the screw less stock, the barrel, barrel band and pump handle.  If you are into plastic parts you might want to use the barrel band/sight from a 1322.  You can easily bore out the hole for the barrel and then you will have a sight.
http://www.crosman.com/pdf/manuals/crosman/2289/C2289-EVP.pdf
http://www.crosman.com/pdf/manuals/1322%20EVP%20&%20PL4.pdf

[bgmcgee]

Or if you really want one I have a new never installed one I'll send to ypu for postage.

[mudduck48]

I just found this thread while looking for the part #  the 2289 jiggermaddigger that holds the barrel and pivot for the pump...

Get a hold of Davio and buy one of these pins. I have one on my 1300 and it is the best you can buy.
http://www.ebay.com/itm/NEW-DESIGN-STAINLESS-STEEL-ROLL-PIN-REPLACEMENT-for-Crosman-1322-BackPacker-ETC-/290983292135?pt=LH_DefaultDomain_0&hash=item43bff4ace7

[K.O.]

Get a hold of Davio and buy one of these pins. I have one on my 1300 and it is the best you can buy.
http://www.ebay.com/itm/NEW-DESIGN-STAINLESS-STEEL-ROLL-PIN-REPLACEMENT-for-Crosman-1322-BackPacker-ETC-/290983292135?pt=LH_DefaultDomain_0&hash=item43bff4ace7

Hey you are just a bit late and maybe just a bit Quackers Ducky.

But yep good roll pins are a must especially if you plan on disassembling and reassembling,

mine was migrating before then though...

Look for the pretty picture... many pins will work but the one I chose just look right and work...

http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,12770.0.html

[K.O.]

Or if you really want one I have a new never installed one I'll send to ypu for postage.

Thanks,
I want a sight but I want it at the end of the longer barrel.

[mudduck48]

Hey you are just a bit late and maybe just a bit Quackers Ducky.

But yep good roll pins are a must especially if you plan on disassembling and reassembling,

mine was migrating before then though...

Look for the pretty picture... many pins will work but the one I chose just look right and work...

http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,12770.0.html

yep, i guess so, i must have missed something. I thought you wanted a pump arm pin. Guess not. Davio makes some really pump arm pins. I'll just go DUCKY NOW. QUACK,QUACK!!

[K.O.]

Or if you really want one I have a new never installed one I'll send to ypu for postage.

I just ordered one but can actually use one more when in the spring I upgrade the 1377s barrel.

The only problem is having lived in Hilmar(near Turlock)

I am a little worried it might need some serious decon...

Its a coming from little close to the Stinka from Manteca(Man-stinka)  There was even a song  about it (1980s I think)

Oh who is this guy Ypu ?  ( Is that pronounced why poo ,I would not want to offend him?)

[K.O.]

   

yep, i guess so, i must have missed something. I thought you wanted a pump arm pin. Guess not. Davio makes some really pump arm pins. I'll just go DUCKY NOW. QUACK,QUACK!!

And I like the washer trick of yours also so.

If it looks like a,

walks like a,

swims like a,

You can sure as h*ck bet it taste like a...

[mudduck48]

Well, thank you. I also had to do that to my 1300 medalist II.

[K.O.]

I just ordered one but can actually use one more when in the spring I upgrade the 1377s barrel.

The only problem is having lived in Hilmar(near Turlock)

I am a little worried it might need some serious decon...

Its a coming from little close to the Stinka from Manteca(Man-stinka)  There was even a song  about it (1980s I think)

Oh who is this guy Ypu ?  ( Is that pronounced why poo ,I would not want to offend him?)

You do know I am kidding about the decon...

But back in the 80's the was a (sugar beet I think) processing plant in Manteca and boy did it smell. 

PM me with your address and what ya need for postage.
                               
                                                            Kirby

[Davio]

Hey you are just a bit late and maybe just a bit Quackers Ducky.

But yep good roll pins are a must especially if you plan on disassembling and reassembling,

mine was migrating before then though...

Look for the pretty picture... many pins will work but the one I chose just look right and work...

http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,12770.0.html

You DID get yours from me, KO.  That's why I said how nice it looked... and then winked at ya.  You nearly quoted me on the "This is very probably how Crosman would do it if they were not after the Walmart shopper." from my listing."   

[K.O.]

You DID get yours from me, KO.  That's why I said how nice it looked... and then winked at ya.  You nearly quoted me on the "This is very probably how Crosman would do it if they were not after the Walmart shopper." from my listing."   

I did not even notice How close I was to quoting you...

It was just my honest opinion...