Looking for Spec's?

[AS13]

I'm creating a spread sheet with the sizes of the stock springs and orings in my .22 cal 2400/2250. Searching the forums for this info is driving me nuts. This way if I order any of the above I'll have an idea what I'm looking for. If anyone has the following info, I need ...
Hammer spring- OD, ID, Wire Thickness and OAL.
Transfer port oring- OD, ID or size (006,007,etc.).

Thanks!!!

[mr007s]

I'm pretty sure a list is here on this site someplace. I remember contributing to it. It may take a while to find it, if it is still here. Several forum problems had some threads go missing. Hope this was not one of them.

[AS13]

Yep...Spent over an hour the other day searching through the "Tech" section for oring sizes. I didn't come across anything on springs that I could use.

[1377x]

dont search per section
go to the index(home) page of the board and search from there some of this info is in general airgunning
i can tell you the transfer port gasket(o-ring) is a square o-ring available only from crosman afaik dont think anyone ever measured it.most people replace it with 1/4" refrigerator water line it has an id of .170,i use micro sprinkler irrigation line it has an id of .161 and an od of "1/4
the hammer spring and o-ring info is here somewhere

[arkmaker †]

2240 hammer spring

O.D. = .282"
I.D. = .220"
Overall LENGTH = 2.010"
Wire = .031"

[1377x]

wow!
now i see why people recommend 1377 hammer springs as a heavy spring for the 2XXX guns

[AS13]

Great

Thanks!!!