Crosman Cr 150 Spare Parts.

[mrto]

Hi Guys,
            Can anyone let me know where I may find spares for the Cr150 vintage Co2 pistol.The parts in particular that I am looking for are a complete screw on cylinder end cap assembly a rear sight and the sliding breech cover retaining pin.Thanks in advance.

[droid]

They have some of the parts at JG Airguns, depends if you need chrome or not.

http://www.jgairguns.biz/catalog/index.php?cPath=78_89_123

[mrto]

They have some of the parts at JG Airguns, depends if you need chrome or not.

http://www.jgairguns.biz/catalog/index.php?cPath=78_89_123

Hi Gary,
            Yes, that covers all but the pin.

  Many thanks for your help.

  Regards,
              Mark..

[droid]

Nice, glad that helped Mark 

[arkmaker †]

At some point Crosman recommended that the stock retaining screw be changed out for a more standard one. I don't have the factory manual with me right now, but will look it up tonight if you still need it.

[mrto]

At some point Crosman recommended that the stock retaining screw be changed out for a more standard one. I don't have the factory manual with me right now, but will look it up tonight if you still need it.

Thanks for your help,but when you say "stock retaining screw"do you mean for the retaining pin?

  Regards,
               Mark.

[mrto]

Thanks for your help,but when you say "stock retaining screw"do you mean the retaining 'pin'?

  Regards,
               Mark.

[Crosshairs]

You should look on gunbroker. Com sometimes they will have a whole gun for parts at a price you might pay just for the parts you need I have done this many times.
Mike

[arkmaker †]

Stock as in what came originally on the pistol. You need a bolt cover retaining screw right?
I am on my kindle right no w so when I FIRE up my laptop, I will post the info from the manual.

[arkmaker †]

Here is the drawing and the note on the screw switch from the manual. My 150 still retains all of the original parts.
Hope this helps a bit.
Rich

[mrto]

Hi Rich,
           Thanks for posting the diagram I have sent you a PM requesting a pdf copy.

  Regards,
               Mark.