WHAT's IN YOUR FEDEX/UPS TRUCK?

DaveB50 · April 19, 2013, 04:41:57 AM

Crosman sent me a bare 1322 grip frame instead of the 1701P grip frame assy I ordered.

Will have to give them a call in the morning. The part numbers aren't even close.

DaveB50 · April 19, 2013, 04:45:37 AM

I do like that barrel band, hope he makes some for the 2240 too.

quickster47 † · April 19, 2013, 05:01:49 AM

Quote from: DaveB50 on April 19, 2013, 04:41:57 AM
Crosman sent me a bare 1322 grip frame instead of the 1701P grip frame assy I ordered. Will have to give them a call in the morning. The part numbers aren't even close.

I know you got it correct but this is the number Trigger Frame - 2220-103 you used, correct?

Carl

bgmcgee · April 19, 2013, 05:28:30 AM

Quote from: DaveB50 on April 19, 2013, 04:41:57 AM
Crosman sent me a bare 1322 grip frame instead of the 1701P grip frame assy I ordered. Will have to give them a call in the morning. The part numbers aren't even close.

Seems like Crosman has done that a lot lately. My last order they sent me a 22xx valve instead of the power adjuster, called them they told me they would ship the right part out a.s.a.p. well the day after they got the valve back from me they shipped my part. A week later on top of that they sent me 2 in 2 different envelopes. I'm not sending the other one back since it took them a week to ship my right part that I know I ordered.

Tater · April 19, 2013, 07:02:08 AM

Quote from: quickster47 on April 19, 2013, 03:33:58 AM
Tater who is the thread author?

Carl

I know Ed posted already, but it's QVTom's thread. http://www.gatewaytoairguns.org/GTA/index.php?topic=45757.0

Jerry

1377x · April 19, 2013, 08:11:38 AM

Quote from: DaveB50 on April 19, 2013, 04:45:37 AM
I do like that barrel band, hope he makes some for the 2240 too.

the barrel band will fit any 2xxx or disco. in the thread on gta it is mounted on the disco

quickster47 † · April 19, 2013, 01:37:50 PM

Quote from: 1377x on April 19, 2013, 08:11:38 AM
the barrel band will fit any 2xxx or disco. in the thread on gta it is mounted on the disco

Ed did you get yours from QVTom directly?

Carl

DaveB50 · April 19, 2013, 03:34:27 PM

Quote from: quickster47 on April 19, 2013, 05:01:49 AM
I know you got it correct but this is the number Trigger Frame - 2220-103 you used, correct?

Carl

Yes that's the one I ordered, what I got was 1322B051. I just got off the phone with Crosman, there sending the correct one right out.
Dave

KevinP · April 19, 2013, 06:05:04 PM

Quote from: Bill L. on April 18, 2013, 11:47:24 PM
My RWS 850 Air Magnum will be here Monday . Thank God I didn't have to wait 4 weeks like I had to for my Crosman custom

I have been looking at this for a long time and feel it is a must have .................... somehow ...

JEBert · April 19, 2013, 07:03:22 PM

I just came from the mailbox with a package from Crosman. I now have enough parts to turn my 2300KT into a 2250 (or a 2400KT) except for a foregrip. I haven't figured out what I want to do for a foregrip yet, maybe I'll make one.
Then I'll have enough left over parts to make a Gauntlet II entry. I've been thinking about a 150 clone for quite a while now but I don't want to give too much of it away yet.
Cheers,

BDS · April 19, 2013, 08:38:37 PM

Quote from: KevinP on April 19, 2013, 06:05:04 PM
I have been looking at this for a long time and feel it is a must have .................... somehow ...

I hear ya Kevin, that 850 nags at me too, one of the few higher powered co2 guns out there.

1377x · April 19, 2013, 08:43:58 PM

Quote from: quickster47 on April 19, 2013, 01:37:50 PM
Ed did you get yours from QVTom directly?

Carl

yes
the band was made for me because of the hose clamp I had on my stainless 2260.
the 4-48 breech screw kept backing out by the 4th shot. I tried the stainless steel 4-48 screws I have and the stock 4-48 screw ,they all backed out. once I added the hose clamp to the breech as a make shift breech band QVTom saw that and said that wouldn't do on such a nice shooter. Tom, a few others and myself came up with the band as a replacement for the hose clamp. this weekend I will test the barrel band and if it makes the grade it will go into production. it needs to keep my poly port sealed and my 4-48 breech screw from backing out. if it does those thing it will get my nod. if not then its back to R&D for me
if you go to gta and read my stainless steel 2260 threadhttp://www.gatewaytoairguns.org/GTA/index.php?topic=39473.0 you will get more insight an how this band was developed. there is a new thread mentioned by Tater that QVTom started thats about the barrel band he made for me and hopefully if it pans out the first 20 will go to anodizing then more will be made as a production part. he wants to make a Crosman line of parts for sale. it's mentioned in my s/s 2260 thread there

ped · April 19, 2013, 08:55:46 PM

if his other parts are the same quality as the band he's made for you they'll certainly be in demand
i've thought about using larger breech hold down screws or turning the front of the breech down so a band can be fitted but still be streamlined
ped

Tater · April 19, 2013, 09:40:58 PM

I can't wait to hear how the band works out for you Ed, it looks really cool. You would be able to change barrels without taking out the roll pin with that, correct?

1377x · April 20, 2013, 12:53:51 AM

Quote from: Tater on April 19, 2013, 09:40:58 PM
I can't wait to hear how the band works out for you Ed, it looks really cool. You would be able to change barrels without taking out the roll pin with that, correct?

this band is actually for a 2260 or any gun that shares the same set up like the rest of the 2xxx and disco
in my 2260 build thread on gta he asks what other parts would be of interest now is the time to start throwing ideas his way