What work did you just do?

[bgmcgee]

awsome job chongman!
great pics!!

Very nice.

[targettgii]

Very nice work chongman and Trophyhunter

[ped]

Very nice work chongman and Trophyhunter

i agree top jobs
ped

[cmj21973]

Didn't do this in one day, from 10/11/2012 to 11/11/2012 in my spare time.

1) FT two brass 760 valves
    drilled & tapped them for front grip screw.
    enlarged ports to 5/32", milled a 3/16" counterbore, and angled the valve port shoulder.
2) made two brass sleeves with polytube seals
3) converted an aluminium 1377 valve to a 760 valve.

Took awhile as I was waiting for equipment and tooling to arrive.

[crossliner]

Mounted a torch on 1 of my 2400KTs. Best regards.

[BigErn]

Mounted a torch on 1 of my 2400KTs. Best regards.

That is most excellent Mr.Crossliner    Two tone torch? Very interesting 

[crossliner]

That is most excellent Mr.Crossliner    Two tone torch? Very interesting 

Yes sir it's black and stainless..Thanks and best regards.

[YSYEO]

Didn't do this in one day, from 10/11/2012 to 11/11/2012 in my spare time.

1) FT two brass 760 valves
    drilled & tapped them for front grip screw.
    enlarged ports to 5/32", milled a 3/16" counterbore, and angled the valve port shoulder.
2) made two brass sleeves with polytube seals
3) converted an aluminium 1377 valve to a 760 valve.

Took awhile as I was waiting for equipment and tooling to arrive.

Nice work!
I'd like to know more about those sleeves.
Are those little O-rings on the end?

[chongman]

Didn't do this in one day, from 10/11/2012 to 11/11/2012 in my spare time.

1) FT two brass 760 valves
    drilled & tapped them for front grip screw.
    enlarged ports to 5/32", milled a 3/16" counterbore, and angled the valve port shoulder.
2) made two brass sleeves with polytube seals
3) converted an aluminium 1377 valve to a 760 valve.

Took awhile as I was waiting for equipment and tooling to arrive.

Very nice machine work

Mounted a torch on 1 of my 2400KTs. Best regards.

Oh yea, I like that! Interesting looking safety you have on there 

[BigErn]

Sanded off the wood grain and bedlined a set of spare grips and pump arm in preparation for the arrival of a 1322  Took me two hours to sand the wood grain off    I should have the 1322 in my possesion by this afternoon if all goes well.

[BDS]

Nice Chongman, the globe and anchor is a great touch... Semper Fi to all the jar-heads and happy vets day to us!

[chongman]

Looking good BigErn  The pump arm looks small or is it an optical illusion

[1377x]

Nice work!
I'd like to know more about those sleeves.
Are those little O-rings on the end?

you and i both!!

nice job bigern!
great looking torch crossliner no vampire is safe as long as you have that handy at night

[Davio]

+1 on the sleeves.  Never have seen those before. 

[Trophyhunter49]

  No work for Me today ,been in bed almost all day! Back went out last nite.  Guy all this work ya'll have done in the last day or two looks just GREAT. Nice job to all